Pro-face AGP-3300 Series Guía de instalación descargar pdf (Pagina 10)

10

Wiring

• To avoid an electric shock, prior to

connecting the GP unit’s power cord

terminals to the power terminal block,

confirm that the GP unit’s power supply

is completely turned OFF, via a

breaker, or similar unit.

• Any other power level can damage

both the GP and the power supply.

• When the FG terminal is connected, be

sure the wire is grounded.

1. Wiring the DC Type Power Cord

 Power Cord Specifications

Use copper conductors only

 Power Connector (Plug) Specifications

• The power connector (plug) is CA5-

DCCNM-01 made by Pro-face or

MSTB2,5/3-ST-5,08 made by Phoenix

Contact.

When connecting the Power Cord, use the

following items when performing wiring.

(Items are made by Phoenix Contact.)

 Connecting the GP Power Cord

(1) Confirm that the GP unit’s Power

Cord is unplugged from the power

supply.

(2) When using GP-3300 Series,

remove the power connector (plug)

from the right side of the main unit

(the rear face for the AGP-3310T/

3360T). (When using GP-3400

Series, the power connector (plug) is

packaged with other accessories.)

(3) Strip the power cord, twist the

conductor’s wire ends, insert them

into the pin terminal and crimp the

terminal. Attach the terminal to the

power connector.

• Use a flat-blade screwdriver (Size 0.6

X 3.5) to tighten the terminal screws.

The torque required to tighten these

screws is 0.5 to 0.6 N•m [5-7 Lb•In.].

• Do not solder the cable connection.

Power Cord

Diameter

0.75 to 2.5 mm

2

(18 - 12 AWG)

Conductor

Type

Simple or Stranded Wire

*1

*1 If the Conductor’s end (individual) wires are not

twisted correctly, the end wires may either short

against each other, or against an electrode.

Conductor

Length

+ 24 V

-

0 V

FG

Grounding

Terminal

connected

to the GP

chassis

7 mm

[0.28 in]

Insertion

Direction

+

-

FG

Recomended

Driver

SZF 1-0.6x3.5

(1204517)

Recomended

Pin Terminals

AI 0.75-8GY (3200519)

AI 1-8RD (3200030)

AI 1.5-8BK (3200043)

AI 2.5-8BU (3200522)

Recomended

Pin Terminal

Crimp Tool

CRIMPFOX ZA 3

(1201882)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios